Quartz countertop installation precautions

1. Before installation, you need to check the flatness of the cabinet and check whether the size of the quartz countertop matches the cabinet exactly. If errors occur, the quartz countertops need to be reworked or the cabinets trimmed.

2. When measuring the depth of the cabinet, the table needs to have a size of 4cm to facilitate the installation of the lower hanging edge.

3. When splicing some extra-long countertops (such as L-shaped countertops), in order to ensure the flatness of the countertops and the tightness of the joints, it is recommended to use strong fixing clips (A clips, F clips) to fix the quartz stone plate. In addition, when bonding the lower hanging strip, it is also necessary to use a strong fixing clip to fix it, to ensure that the table top splicing and the gap between the table top and the lower hanging strip are perfectly combined.

4. There should be a certain distance between the quartz stone countertop and the wall (usually 3mm to 5mm). After the installation is completed, the glass glue should be evenly coated in the gap between the countertop and the wall.

5. In bench installation, try to avoid large-scale cutting and opening of quartz stone at the construction site, on the one hand to prevent cutting dust from contaminating the construction site, and on the other hand to prevent inaccurate cutting from causing errors.

6. Due to the higher hardness and higher density of quartz stone countertops, the processing technology requirements are higher. Therefore, for the installation of quartz stone countertops, you should contact a professional quartz stone installation master and use professional tools for installation. Never blindly install it by yourself, otherwise it will cause